logo

Chi tiết sản phẩm

Created with Pixso. Nhà Created with Pixso. các sản phẩm Created with Pixso.
Thiết bị bảo vệ điện áp thấp
Created with Pixso.

KJ4003X1-BA1 Emerson 8-W Power Supply Module Brand New Original

KJ4003X1-BA1 Emerson 8-W Power Supply Module Brand New Original

Tên thương hiệu: Emerson
Số mẫu: KJ4003X1-BA1
MOQ: 1
giá bán: Negotiations
Thông tin chi tiết
Nguồn gốc:
Nhật Bản
Kiểu:
Mô -đun cung cấp điện
Sốc:
10g ½ Sóng hình sin trong 11 mili giây
Nhiệt độ môi trường:
-40 ° C đến +70 ° C.
chi tiết đóng gói:
Hộp gốc mới
Làm nổi bật:

Emerson 8-W power supply module

,

original Emerson power supply

,

low voltage protection power module

Mô tả sản phẩm
KJ4003X1-BA1 Emerson 8-W Power Supply Module Brand New Original
Product Specifications
Brand Emerson
Model Number KJ4003X1-BA1
Type Power Supply Module
Shock 10g ½ Sinewave for 11msec
Ambient Temperature -40°C to +70°C
Warranty 1 Year
Power Specifications
  • Local Bus Power: 12.6 VDC at 15 A
  • Field Circuit Power: 30 VDC at 13 A
Environmental Specifications
  • Ambient Temperature: -40°C to +70°C
  • Shock: 10g ½ Sinewave for 11msec
  • Vibration: 1mm Peak to Peak from 2 to 13.2Hz; 0.7g from 13.2 to 150Hz
  • Airborne Contaminants: ISA-S71.04 -1985 Airborne Contaminants Class G3
  • Relative Humidity: 5 to 95% Non-Condensing IP 20 Rating
Note: Refer to the product label for serial number and location and date of manufacture.
Warning: This product has specific instructions for installation, removal and operation in hazardous areas. Refer to document 12P2046 "DeltaV™ Scalable Process System Zone 2 Installation Instructions".
Removal and Insertion
  • This unit cannot be removed or inserted with system power energized.
  • Power must be de-energized before disconnecting any carriers or LocalBus Extender cables.
  • Bussed field power must not be connected to a supply that generates or contains a source of potential in excess of 30 VDC.
  • Field power supplied to this device either at the field terminal or as bussed field power via the I/O carrier must be removed before removing or connecting this device.
  • A module cover (KJ4001X1-FA1) must be fitted to any permanently unoccupied location on an I/O module carrier.
  • This product must not be unplugged unless either the system has been de-energized or the area is known to be safe.
  • No combination of I/O carriers and LocalBus Extenders must exceed a length of 6.5 meters.
  • Interconnecting cable between enclosures must be in conduit.
Maintenance and Adjustment
  • This unit contains no user serviceable parts and should not be disassembled for any reason.
  • Calibration is not required.