logo

Chi tiết sản phẩm

Created with Pixso. Nhà Created with Pixso. các sản phẩm Created with Pixso.
Thiết bị bảo vệ điện áp thấp
Created with Pixso.

GE Fanuc IC697BEM733 Remote I/O Scanner PCB BEM 733

GE Fanuc IC697BEM733 Remote I/O Scanner PCB BEM 733

Tên thương hiệu: GE Fanuc
Số mẫu: IC697BEM733
MOQ: 1
giá bán: Negotiations
Thông tin chi tiết
Place of Origin:
USA
Packaging Details:
New original box
Làm nổi bật:

GE Fanuc BEM733 I/O scanner PCB

,

Remote I/O scanner module BEM733

,

IC697BEM733 PCB with warranty

Mô tả sản phẩm
Replacement Power Circuit Boards IC697BEM733 PCB BEM 733 Remote I/O Scanner
Control Circuit Board GE FANUC IC697BEM733 PCB BEM 733 REMOTE I/O SCANNER
Description: Series 90-70 Genius I/O Scanner
Technical Specifications
Module Type: Remote I/O Scanner
Eff. Data Rate: 38.4 Kbaud
Max Distance from Controller: 7500 feet
Discrete Points Available: 128 bytes per drop
Serial Ports: 2
Current Required: 0.8 Amp
Detailed Specifications
  • Maximum Bus Length: 7500 feet (2275 meters) at 38.4 Kbaud, 4500 feet (1365 meters) at 76.8 Kbaud, 3500 feet (1060 meters) at 153.6 Kbaud extended, 2000 feet (605 meters) at 153.6 Kbaud, standard.
  • Maximum Number of Devices per Bus: 32 devices at 153.6 Kbaud standard, 153.6 Kbaud extended, or 76.8 Kbaud. 16 devices at 38.4 Kbaud.
  • 153.6K baud extended: Up to 20 fully-loaded drops, or up to 30 drops if not fully-loaded.
  • 76.8K baud: Up to 10 fully-loaded drops, or up to 30 drops if not fully-loaded.
  • Weight: 1.5 lbs
  • Type of Device: I/O Module Genius Remote Bus Expansion 128BYTES
  • LEDs: Module OK, I/O Enabled, Bus B Active
  • Ports: One 15-pin RS-422/485 compatible serial port, one 9-pin IC66* Hand-held Monitor port.
  • Size: Occupies single slot in IC697 remote rack
  • Current Required from +5V Bus: 0.8 amps
  • Bus Type: Daisy-chained bus cable; single twisted pair plus shield or Twinax.
  • Bus Termination: 75, 100, 120, or 150 ohm resistor at both ends of electrical bus cable.
  • Baud Rate: Configurable. 153.6 Kbaud standard, 153.6 Kbaud extended, 76.8 Kbaud, or 38.4 Kbaud.
Product Description
The IC697 Remote I/O Scanner (IC697BEM733/735) is an intelligent module that mounts in a remote IC697 rack, and interfaces IC697 I/O modules to an IC66* bus. A Remote I/O Scanner and the modules it serves make up a remote drop on the IC66* bus. A remote drop can consist of up to eight racks, linked by Bus Transmitter and Bus Receiver modules. 9-slot and/or 5-slot IC697 racks can be used. The maximum distance from the first rack to the last rack in a remote drop is 50 feet (15 meters).
The Remote I/O Scanner can handle any mix of discrete and analog inputs and outputs up to a total of 1024 discrete inputs and 1024 discrete outputs, or 64 analog inputs and 64 analog outputs (regardless of the number of racks in the remote drop). A remote drop can include all presently-available IC697 discrete modules, analog modules, and analog expander modules. Bus Transmitter, Bus Receiver, PCM, and ADS modules can also be placed in a remote drop.
The Remote I/O Scanner is ideally suited for use in an IC697 PLC system. However, any type of PLC or computer capable of controlling an IC66* bus can be used as the host. Suitable hosts include IC660 PLCs, IC655 PLCs, and computers equipped with a PCIM (Personal Computer Interface Module), QBIM (Q-Bus Interface Module), or a third-party GENI-based interface.